BUSCAR
TEMAS >FORO UK/US> HARDWARE > Hercules RMX, eeprom repair
Volver a los temas RESPONDER

Hercules RMX, eeprom repair

achis


2 Mensajes 		Publicado el 12/28/19 a 21:30:09
0
0
 CITAR
Greece
 Hi all...

It's been a few years since my Hercules RMX was bricked during a firmware update..  The help I received from support back then was zero.. No solution or guidance was offered at all, to my dissapointment, they actually wrote : Buy a new one..

Now I understand I can fix my RMX using a simple eeprom to USB programmer.
Can someone guide me through this process? 

User Experience Team


2443 Mensajes 		Publicado el 01/02/20 a 14:54:18
0
0
 CITAR
Canada
  • DJControlInpulse 300 MK2
  • DJControl Inpulse 500
  • DJ Console 4-Mx
  • Serato
  • Djuced
  • VirtualDJ
  • Traktor
 Hello,

1) How did you contact Hercules tech support,
- by messaging on https://support.hercules.com/en/contact-en/
- by phone (there is no local phone support in Greece, but you could contact the english phone number for example)?
I am surprised nobody provided guidance on burning the Rmx firmware on an external eeprom burner as
- I started giving this information on this forum for years (pre-2015 discussions have been archived, but I started earlier, my account was Maxdjack, and thsi process was also explained by Made In Breizh, who now belongs to of Hercules UX Team as I do),
- this eeprom process information comes from Hercules who gave me the firmware .bin file and the explanation, and what I post comes from both Hercules technical support team and from my own experience.

If you gave no technical information to Hercules technical support regarding the circumstances of the Rmx firmware issue, they could not help you, as Rmx non connection most frequent issues are not failure during firmware updates, but
- firmware never updated : then it is much easier to update the firmware via the USB than to use an eeprom burner,
- =RMX USB cable too long : its length was OK for USB 2.0, but since USB 3.0, the the length of this USB cable causes some USB timing issues which prevents the DJ COnsole Rmx from being enumerated by the USB host.

 2) Anyway, if I consider you know your Rmx firmware was bricked during a firmware update failure, what you have to do is to:
a) accept my invitation here, so that I can send you a private email with the Rmx firmware file and the process to disassemble the DJ Console Rmx,
b) get an eeprom bruner, as
https://www.amazon.com/s?k=CH341A+eeprom+burner
and learn to use a CH341A eeprom burning program
https://www.mdclab.it/lab-usb-programmer-ch341a.html
https://sourceforge.net/projects/ch341eepromtool/
https://www.kazmielecom.com/2018/07/27/ch341a-usb-mini-programmer-soft ware-free-download.html
or find an electronic repair who is ready to do it for you.
c) then you email me (via the forum private messaging or this discussion) that you need the Rmx firmware bin file and the Rmx process to open the Rmx,
d) then when you get them, you open the Rmx, you remove the eeprom from Rmx eeprom socket thanks to an eeprom clamp,
e) and you place the eeprom on your eeprom burner, and with the program for CH341A burners, write the bin file in the eeprom,
f) then recheck with the computer than the bin file is readable in reading this bin file on the eeprom burner
g) and once you are sure the eeprom has the .bin file and nothing else, it is time to
h) remove the eeprom from its burner,
i) place the eeprom again on Rmx socket, test if the DJ Console Rmx boots when connected on a computer on which you have installed DJ Console Rmx drivers (2019.HDJS.1),
j) and if the DJ Console Rmx boots, unplug the USB cable, and re-assemble the Rmx.

achis


2 Mensajes 		Publicado el 01/27/20 a 19:14:31
0
0
 CITAR
Greece
 Thank you for your reply... 
I did not get back to you as Hercules Official support started to help me... They said that they will be happy to assist me in providing me the file etc... And after that they simply vanished.. I've been sending messages on the ticket for 20 days and they are ignoring me. 

User Experience Team


2443 Mensajes 		Publicado el 01/28/20 a 09:50:43
0
0
 CITAR
Canada
  • DJControlInpulse 300 MK2
  • DJControl Inpulse 500
  • DJ Console 4-Mx
  • Serato
  • Djuced
  • VirtualDJ
  • Traktor
 Hello,

I have sent you in a private email on https://www.herculesdjmixroom.com/en-us/account/messages/  ;the link with the firmware file and the guidelines to disassemble the Rmx. Please download it within 1 week as the link lasts 1 week only. 

Did you contact Hercules Tech Support with the email address you mention in your message (so that I check with Hercules Tech Support where/why you got no answer)?

DoranHannes


1 Mensajes 		Publicado el 11/12/20 a 09:20:04
0
0
 CITAR
Germany
Hi. I just found this thread and I have the exact same problem. Thanks so much for putting a solution for this problem out there. I already ordered the EEPROM burner you mentioned. Could you please send me the firmware file to write on the BIOS chip?

Much apprechiated. Cheers!
Doran

User Experience Team


2443 Mensajes 		Publicado el 11/12/20 a 22:45:37
0
0
 CITAR
Canada
  • DJControlInpulse 300 MK2
  • DJControl Inpulse 500
  • DJ Console 4-Mx
  • Serato
  • Djuced
  • VirtualDJ
  • Traktor
 Hello DoranHannes,

Welcome on the forum.
I have sent you the firmware file in the forum private messaging. 

forawhileguy


3 Mensajes 		Publicado el 08/10/21 a 20:37:46
0
0
 CITAR
Poland
 Hello, can I get updated instruction how to reprogram eeprom module, and possible ways to fix constant blinking lights. Also can I get eeprom bin file? Thank you so much for help, i hope I can finally use this gear.

forawhileguy


3 Mensajes 		Publicado el 08/10/21 a 20:44:28
0
0
 CITAR
Poland
 Do you have, by any chance, some instruction how can I dismantle Hercules RMX to het access to eeprom?

User Experience Team


2443 Mensajes 		Publicado el 08/12/21 a 09:58:30
0
0
 CITAR
Canada
  • DJControlInpulse 300 MK2
  • DJControl Inpulse 500
  • DJ Console 4-Mx
  • Serato
  • Djuced
  • VirtualDJ
  • Traktor
 Hello forawhileguy,

Welcome to the forum.
Please
1) accept my invitation on https://www.herculesdjmixroom.com/en-gb/account/friends/: I can send the eeprom bin file and the disassembling instructions only via private messaging, so as long as you do not accept my invitation, I cannot send you a message on the private messaging area
2) confirm you have an eeprom burner (either a basic one as https://www.amazon.de/DollaTek-EEPROM-Routing-Programmer-CH341 A/dp/B07DJ4GF3N/ref=sr_1_6 or a better one) or you can ask an electronic repair store to burn the eeprom for you
3) and send me, in a private message, the request of "DJ Console Rmx disassembling instructions" and the eeprom bin.

forawhileguy


3 Mensajes 		Publicado el 08/12/21 a 18:27:03
0
0
 CITAR
Poland
 I accepted invitation, thank you for your help. I hope for fast response. Cheers!, forwhileguy

User Experience Team


2443 Mensajes 		Publicado el 08/13/21 a 11:34:17
0
0
 CITAR
Canada
  • DJControlInpulse 300 MK2
  • DJControl Inpulse 500
  • DJ Console 4-Mx
  • Serato
  • Djuced
  • VirtualDJ
  • Traktor
 Hello forawhileguy,

Thanks for your answer, I have sent you the link in the private messaging area: Wetransfer keeps the link active for 1 week.  
Volver a los temas RESPONDER