SPARTE >FOREN UK/US> HARDWARE > RMX2 Non Stop Vegas Mode ?
Zurück zu den Themen ANTWORT

RMX2 Non Stop Vegas Mode ?

User Experience Team


2156 Nachrichten
Eingestellt von 11/19/21 an 14:22:25
0
0
QUOTE
Canada
  • DJControl Inpulse 300
  • DJControl Inpulse 500
  • DJ Console 4-Mx
  • Serato
  • Djuced
  • VirtualDJ
  • Traktor
Hello Yucell,


Thanks for the message.

We will not be able to make a continuous Vegas mode on Rmx2 in the way I had expected at start (a hardware command or a control panel command) so I had considered another process, playing a MIDI file. 
I did not send you anything since the firmware developper could not send me the Vegas scenario in MIDI format: as a result, I have to rewrite it.


yucelll


28 Nachrichten
Eingestellt von 11/19/21 an 20:17:10
0
0
QUOTE
Turkey
  • DJConsole RMX2
  • Djuced
  • VirtualDJ
Hello Yucell,


Thanks for the message.

We will not be able to make a continuous Vegas mode on Rmx2 in the way I had expected at start (a hardware command or a control panel command) so I had considered another process, playing a MIDI file. 
I did not send you anything since the firmware developper could not send me the Vegas scenario in MIDI format: as a result, I haveto rewrite it.

Thank you for the information. Then I'm waiting. Good luck with.

yucelll


28 Nachrichten
Eingestellt von 12/02/21 an 13:33:16
0
0
QUOTE
Turkey
  • DJConsole RMX2
  • Djuced
  • VirtualDJ
Hello again. Isn't it over yet?

User Experience Team


2156 Nachrichten
Eingestellt von 12/02/21 an 23:52:32
0
0
QUOTE
Canada
  • DJControl Inpulse 300
  • DJControl Inpulse 500
  • DJ Console 4-Mx
  • Serato
  • Djuced
  • VirtualDJ
  • Traktor
Hello,

I cannot answer more than this.
Redesigning the vegas mode is nobody's job as it is a nice update but not a need, so its tasks (write the lights scenario, set the times, update the MIDI player to support the timer instructions, run the tests, reset the timer where it fails, etc..) must find their way in "free" time while the period is super loaded (end of year is always loaded, this year + covid + Windows 11 + apple M1 (M1 Pro) issues). Big priorities will always be first, secondary projects move from time to time when getting free time,  & remain on hold while bigger priorities are processed.

yucelll


28 Nachrichten
Eingestellt von 12/03/21 an 11:03:55
0
0
QUOTE
Turkey
  • DJConsole RMX2
  • Djuced
  • VirtualDJ
oo it's much harder than it looks. Okay. Thank you for answering.

yucelll


28 Nachrichten
Eingestellt von 03/04/22 an 16:38:56
0
0
QUOTE
Turkey
  • DJConsole RMX2
  • Djuced
  • VirtualDJ
Hello,

I cannot answer more than this.
Redesigning the vegas mode is nobody's job as it is a nice update but not a need, so its tasks (write the lights scenario, set the times, update the MIDI player to support the timer instructions, run the tests, reset the timer where it fails, etc..) must find their way in "free" time while the period is super loaded (end of year is always loaded, this year + covid + Windows 11 + apple M1 (M1 Pro) issues). Big priorities will always be first, secondary projects move from time to time when getting free time,  & remain on hold while bigger priorities are processed.
Hello again. I also deal with electronics. I know a little about C languages. What can I do about this issue? Can you provide me with the necessary resources? So maybe I can manage to do it myself. Because my device stays on 24/7. And sometimes I really want it to repeat the light effect.

User Experience Team


2156 Nachrichten
Eingestellt von 03/07/22 an 15:37:21
0
0
QUOTE
Canada
  • DJControl Inpulse 300
  • DJControl Inpulse 500
  • DJ Console 4-Mx
  • Serato
  • Djuced
  • VirtualDJ
  • Traktor
Hello yucell,

If the developper who wrote the firmware of DJConsole Rmx2 could not isolate the MIDI sequence of the vegas mode, I am sure you cannot do more with the compiled firmware, and we cannot send you the source code as our licence agreement for the USB audio core does not give us the right to disclose the source code.

But on the other hand, writing a MIDI sequence to light on the LEDs is not very difficult, it just takes time.
With 
https://ts.hercules.com/download/sound/manuals/Rmx2/RMX2_MIDI_Commands .pdf
you can read the MIDI commands to light on the keys (as the MIDI in and MIDI out commands are the same : for example, if Play deck A sends the MIDI command 9x 21, then sending 9x 21 7F lights on the Play key, 9x 21 00 lights off the Play key.
you can see the

yucelll


28 Nachrichten
Eingestellt von 03/08/22 an 12:32:12
0
0
QUOTE
Turkey
  • DJConsole RMX2
  • Djuced
  • VirtualDJ
Oh thank you for answer, This seems more logical.
I just need to research on the internet how to send it into it and write those codes. I will read the documentation about it. When the device is not in use, it would be nice if it did light dances.

yucelll


28 Nachrichten
Eingestellt von 07/17/22 an 14:52:15
0
0
QUOTE
Turkey
  • DJConsole RMX2
  • Djuced
  • VirtualDJ
Hello again,
how are the studies going? I still haven't been able to and I'm stuck with it. I hope that soon this will be done by you, and I will be able to watch vegas mode at rmx2. :/

yucelll


28 Nachrichten
Eingestellt von 10/25/22 an 13:32:31
0
0
QUOTE
Turkey
  • DJConsole RMX2
  • Djuced
  • VirtualDJ
Hello Guys,

I think I managed to make the lights dance with Fl studio's Midi out feature. Since it is already loop feature, it dances nonstop when you click the play button in FL studio. And now I don't know how to send this .mid file to RMX2 without fl studio.