TEMATICHE >FORUM DE> HARDWARE > Hercules RMX Firmware
Torna alle discussioni RISPONDI

Hercules RMX Firmware

Penbeni


1 Messaggi
Inserito il 01/26/15 a 11:29:54
0
0
FONTE
France
Hello Axelpose,

I carefully read your message regarding what to do after a firmware update failure. I have a EEPROM programming device and would really like to have the binary data to be rewritten. Please could you send me the file so I will be able to try to repair my Rmx ? Also could you confirm me the EEPROM is in a socket and is not a smd ?

Thanks a lot, I am waiting for your reply.

Terry

In anycase, before you may ask for these information :
Windows 7 Ultimate 64 bit
I can't give you any information of the version on the RMX because it is not even recognised by windows and it's continuously blinking.
The RMX is connected on a 2.0 USB port.
When I connect the RMX, it starts to illuminate the mic ON/OFF button, then starts blinking and windows does not show any device added or connected neither on the desktop with a popup nor in the device manager window.

Thanks again.

Made In Breizh


1148 Messaggi
Inserito il 01/27/15 a 10:35:36
0
0
FONTE
France
  • P32 DJ
  • DJControl Jogvision
  • DJConsole RMX2
  • DJ Console 4-Mx
  • Serato
  • Djuced
  • djay
  • VirtualDJ
  • Traktor
  • Cross
Bonjour Penbeni,

Je vous ai envoyé une invitation ici.
1) Merci de l'accepter et de m'envoyer un message précisant l'adresse email à laquelle vous souhaitez recevoir un firmware pour la DJ Console Rmx.
2) Vous pourriez aussi demander le firmware de la DJ Console Rmx au support technique Hercules.

djstimulants


5 Messaggi
Inserito il 05/18/15 a 08:52:39
0
0
FONTE
UK
  • DJ Console Rmx
  • VirtualDJ
Sent yourself and jack a friends request, really need the eeprom data, thank you in advance!

Maxdjack


2307 Messaggi
Inserito il 05/18/15 a 17:23:26
0
0
FONTE
Canada
  • DJControl Inpulse 200
  • DJControl Inpulse 300
  • DJControl Jogvision
  • DJConsole RMX2
  • Serato
  • Djuced
  • djay
  • VirtualDJ
  • Traktor
  • Cross
Hello DJstimulants,

I have sent you in the private message system the link with the binary file RMX_TUSB_v32.BIN you can burn with a programmer in your eeprom to restore your DJ Console Rmx.


More on Hercules DJ Mix Room:
https://www.facebook.com/HerculesDJMixRoom/
https://twitter.com/HerculesDjMix
https://www.instagram.com/hercules_djmixroom/  



e-was


1 Messaggi
Inserito il 01/31/19 a 17:33:17
0
0
FONTE
Germany
hi, a hercules rmx just found me. it's constantly blinking. on a windows machine, on a macbook with usb 3 ports, on a macbook with usb 2 ports, on a usb power adapter. already opened it. found the eeprom.

could you please send me the .bin file for flashing the the beast?

thx in advance!



roman

User Experience Team


2156 Messaggi
Inserito il 02/01/19 a 11:57:22
0
0
FONTE
Canada
  • DJControl Inpulse 300
  • DJControl Inpulse 500
  • DJ Console 4-Mx
  • Serato
  • Djuced
  • VirtualDJ
  • Traktor
Hello,

1) As long as you do not precise exactly the computers on which you did your attempts, we cannot know anything, identifying a problem on any computer device requires to know the computer detailed specifications and evaluate whether
- your firmware is bricked and requires disassembling the controller to reflash the eeprom on an external eeprom burner,
- or you can simply reflash the Rmx epprom via its USB bus, which is much safer and easier.

2) You should 
complete your profile in "My Space"> "My Profile" https://www.herculesdjmixroom.com/en-us/account/informat ions/ . 
  - In "Hercules equipment in use", please check your Dj controller, DJ Console Rmx,
  - In "Software in use", check your DJ software,
  - In "Describe your equipment": write your
  • computer brand and model,
  • CPU,
  • quantity of RAM,
  • type of USB on the computer (USB 2, USB 3.0, USB 3.1)
  • version of Windows or macOS (in detail, for example Windows 7 64-bit Service pack 1)
  • version of DJConsole Series driver package installed on the computer
- or if you do not know it, please ask someone who is at ease with computing to fill your profile on the forum.

3) Next attempt should be:
- on macbooks: connect a USB 3.0 hub with its power adapter connected, get a 3 feet USB 2 cable (the USB cable included with DJ Console Rmx is too long since macOS 10.11), install Hercules mac DJSeries Install 6.0.7s drivers which you can download here, and try connecting the DJ Console Rmx with the 3-feet USB cable on the USB 3.0 hub: is it detected or not? 
- on Windows: if you have not Windows 7 or Windows 8.0, you should not try anything: since Windows 8.1, DJ Console Rmx cannot be detected on computers which have any USB 3 or USB 3.1 ports. This DJConsole Rmx non detection issue is fixed with a firmware update of the DJ Console Rmx, but you need a computer with Windows 7 or Windows 8.0 to update the Rmx firmware.
- on Windows: if you have a computer with Windows 7 or 8.0 :  connect a USB 3.0 hub with its power adapter connected, get a 3 feet USB 2 cable  install Hercules drivers 2018.HDJS.3 which you can download here, and try connecting the DJ Console Rmx with the 3-feet USB cable on the USB 3.0 hub: is it detected or not?

Remark 
If you are not at ease with computing, flashing an epprom on an external eeprom burner may be too difficult as eeprom burners programs, which are only for Windows. So if you are not at ease with electronics, we can send you the bin file for your Rmx eeprom, but you should not not try to burn it yourself, but instead contact an electronic repair store who can burn the eeprom in a few minutes, since some users are blocked as hereafter as their eeprom burner is not so easy to use.
https://www.herculesdjmixroom.com/en-us/forum/en-hardware/027231/?star t=30#bottom

Niht


1 Messaggi
Inserito il 07/06/19 a 08:05:01
0
0
FONTE
Colombia
  • DJ Console Rmx
  • VirtualDJ
  • Traktor
Hello,

I also have this problem. My Hercules RMX Led buttons blink, but the PC does not recognize any USB device (it has been tested with many Driver operating systems and different machines). I still have to try the solution to record the EEPROM, can you send me the required firmware?

Thanks for any help I can give, I remain attentive.




User Experience Team


2156 Messaggi
Inserito il 07/08/19 a 11:59:06
0
0
FONTE
Canada
  • DJControl Inpulse 300
  • DJControl Inpulse 500
  • DJ Console 4-Mx
  • Serato
  • Djuced
  • VirtualDJ
  • Traktor
Hello Niht,

I have sent you a private message with the firmware file to burn in the eeprom.
Let us know if it works.


Anthonty


1 Messaggi
Inserito il 08/26/20 a 16:49:51
0
0
FONTE
UK
I have inherited an RMX and have the nice flashing lights and after asking who I got it off I find out he gave it me because he failed the upgrade process due to his "new" laptop not having enough power so he gave it 3 more tries!!
I have the facility to reflash the eeprom, could someone send me the file please?
I've tried an old windows 7 laptop with and without powered USB hub but not recognised so I think i need to reprogram the eeprom with a working file.
Thanks in advance

User Experience Team


2156 Messaggi
Inserito il 08/27/20 a 09:50:34
0
0
FONTE
Canada
  • DJControl Inpulse 300
  • DJControl Inpulse 500
  • DJ Console 4-Mx
  • Serato
  • Djuced
  • VirtualDJ
  • Traktor
Hello Anthonty,

OK; please accept my invitation on https://www.herculesdjmixroom.com/en-us/account/friends/  and send a private message via https://www.herculesdjmixroom.com/en-us/account/messages/&nbs p;in which you confirm the controller for which you need the firmware bin file is DJ Console Rmx, not DJ Console Rmx2.