Setup for DJing with time-code vinyl discs

DJing with time-code vinyl requires
- a DJ software capable of time-code DJing as VirtualDJ Pro, Cross, and 2 time-code vinyl discs supported by the DJ software
- 2 DJ turntables,
- an DJ controller whose audio interface has 2 stereo inputs supporting phono level if the DJ turntables have a phono output level, for example a Hercules DJ Console Rmx2, 4-Mx, Rmx, Mk4 or Mk2.

Then you have 2 possible installations:
- Either you use no analogue mixer: you then use the Hercules DJ Console mixer controls
- Or you use an analogue mixer: you then use the mixer instead of the central controls of Hercules DJ Console.

A) With no analogue mixer
- Connect the outputs of the turntables to Hercules DJConsole Rmx2 :
  - the turntable located on left on inputs 1-2
  - the turntable located on right on inputs 3-4
  - set the inputs on phono level if your turntables output is in phono level,
  - activates your inputs in your DJConsole Rmx2 control panel,
- Connect the headphones on DJConsole Rmx2 headphones output plug, on front panel or on top panel,
- Connect your speakers on DJ Console Rmx2 outputs 1-2 (dual XLR or dual RCA)
- Play your time-code vinyl discs on your 2 turntables
- Run your DJ software, and calibrate your inputs in time code vinyl mode
- your turntable on left side now controls the left virtual deck, your turntable on the right side now controls the right-side virtual deck.
The connections are as follows


B) With an analogue mixer
- Connect the outputs of the turntables to Hercules DJConsole Rmx2 :
  - the turntable located on left on inputs 1-2
  - the turntable located on right on inputs 3-4
  - set the inputs on phono level if your turntables output is in phono level,
  - activates your inputs in your DJConsole Rmx2 control panel,
- Connect the output 1-2 of your DJConsole Rmx2 to the input 1-2 of the analogue mixer,
- Connect the output 3-4 of your DJConsole Rmx2 to the input 3-4 on the analogue mixer,
- Connect the headphones on the mixer headphones output plug,
- Connect your speakers on the mixer master outputs
- Play your time-code vinyl discs on your 2 turntables
- Run your DJ software, and calibrate your inputs in time code vinyl mode
- your turntable on left side now controls the left virtual deck, your turntable on the right side now controls the right-side virtual deck.
The connections are as follows

 
Von

Hercules STAFF3


Tags: Technical tips, DJConsole Rmx2